Gear Punch Knockout Sets from iTOOLco

With hole-making a time-consuming task for electricians and electrical contractors, iTOOLco’sGear Punch Knockout Set is the best tool for punching conduit-size holes into steel electrical panels and boxes.  No other tool can produce a hole as precisely as the Gear Punch Knockout Set.

iTOOLco’sGear Punch Knockout Setpunches standard hole sizes ranging from ½-inch through 6 inches in diameter with 12 different punches and die to fit a variety of applications.  Rated for use in mild steel or stainless steel, the iTOOLco Gear Punch Knockout Setcan also punch through aluminum and comes with an unprecedented six year warranty and a lifetime replacement on draw studs.  No other slug buster offers such an extensive warranty.

Basic Gear Punch Knockout Settool components include punch and die in various sizes, draw studs, and gear punch.  The Gear Punch Knockout Set’s slick-cut technology allows cutting through 10 gauge mild and stainless steel while maintaining the sharpness of cutting edges. The iTOOLco Gear Punch Knockout Setis powered by any cordless drill.  This Gear Punch Knockout Setwill work with any make and model of corded or cordless drill – new or old – with no special add-ons required. Punches and die are clearly marked with trade standard conduit sizes and well as Center Point™ marks for perfect alignment no matter what direction the hole is cut from. 

iTOOlco’sGear Punch Knockout Setis compatible with punch and die offerings and comes with a Center Point™ Knockout Layout Tool accessory designs to help users quickly layout and punch knockouts.  Using the Center Point™ tool makes measuring for slug busting 70 times faster than a using a tape measure because there is no math required.

Stainless Steel Rated

·         Gear Punch, SS 10ga. Rated

·         Knockouts 1/2″ through 6″

·         Draw Stud (lifetime Warranty)

·         Step Bits Helical TiAn Coated

·         3/8″ Nut Drivers

·         Center Point Knockout Layout Tool

·         Fast and Easy With Cordless Drill

·         No Leaking Hydraulics

·         No Hydraulic Seals to Replace

Great Gear Punch Knockout Sets to Choose From

·         GP122- 1/2″ – 2″   Complete Kit

·         GP123- 2-1/2″- 4″ Punch’s & Die’s Only

·         GP124- 1/2″ – 4″   Complete Kit

·         GP156- 5″-6″        Punch’s & Die’s Only

·         GP126- 1/2″- 6″    Complete Ki

Jacks for Electrical and Industrial Solutions

iTOOLco’s jacks for the electrical industry make wire pulling run smooth and easy.  These innovative jacks have four 20,000 lb. sealed bearings that capture the axle to prevent reels from traveling during the pull.  Best of all iTOOLco jacks won’t tip over.

With a capacity of 6,000 lb., iTOOLco’s jacks eliminate the need to lift heavy wire reels, decreasing the risk of back injuries among users.

Safer

These jacks make is possible to easily lift heavy wire reels for convenient pulling. The internal arbor traps the axle prevents it from falling out or traveling horizontally making it safer than other jacks. The separate sides can even be used safely on uneven ground.

Smarter

iTOOLco jacks store and transport on the iTOOLco Real Tender.  These jacks can be used with 22″ to 66″ spools and fit Wemco reels.  The design is compact and includes convenience carrying handles.  At 35 lb. per side, these jacks are portable and easy to carry.  iTOOLco’s jacks can be used with a 1.5” to 2.75” O.D. solid or rigid pipe. 

Faster

iTOOlco jacks set up in under one minute and require no drills or extra tools.  Using iTOOLco  jacks fast and easy.

Heavy Duty Jack Stands for the Electrical Industry

iTOOLco’sjack stands for the electrical industry make wire pulling run smooth and easy.  These innovative jack stands have four 20,000 lb. sealed bearings that capture the axle to prevent reels from traveling during the pull.  Best of all iTOOLco Real Jacks won’t tip over.

With a capacity of 6,000 lb., iTOOLco’s jack stands eliminate the need to lift heavy wire reels, decreasing the risk of back injuries among users.

Safer

These jack stands make is possible to easily lift heavy wire reels for convenient pulling. The internal arbor traps the axle prevents it from falling out or traveling horizontally making it safer than other jack stands. The separate sides can even beused safely on uneven ground.

Smarter

iTOOLco jack stands store and transport on the iTOOLco Real Tender.  These jack stands can be used with 22″ to 66″ spools and fit Wemco reels.  The design is compact and includes convenience carrying handles.  At 35 lb. per side, these jack stands are portable and easy to carry.  iTOOLco’s jack stands can be used with a 1.5” to 2.75” O.D. solid or rigid pipe.

Faster

iTOOlco jack stands set up in under one minute and require no drills or extra tools.  Using the jack stands is fast and easy.